The most important thing is to find a way to fix this problem. Laptops are not usually fixable, so replacing Gateway laptop failure hard drive with new disk is a feasible strategy. Doing a clean install on Gateway laptop can easily solve this problem. Nevertheless, personal data on the dead hard drive generally is the stuff that Gateway users want to save most.
As a result, the subject comes back to the twice-told importance of backup. If you have backed Gateway laptop up to another place before, removing its hard drive and restoring Windows image backup over Network or from an external hard drive is effective.
Anyhow, check this solution to see if it works. Then, you can boot the Gateway laptop off the bootable device and backup data on the old hard drive. If the system is functional, you are able to back up the entire disk and restore to new disk without reinstalling.
At last, Gateway laptop Windows failed to start issue will be easily solved. Download its free trial to have a try.
Step 1. Click Tools and then Create a Bootable Media. Step 2. Follow the wizard to finish the creation. It may pop off on its own while you are prying off the keyboard. Once the thin blue plastic has been detached, remove the keyboard from the rest of the laptop.
Locate and unscrew the five screws indicated by the red circles in the picture using a Phillip's 0 screwdriver. All of the screws are 8. It should be 5. Hold the computer in your hands and use the tip of your screwdriver or a spudger to push through the bottom right hand hole left by the removed screw. This hole is shown in the picture within a red box. The tip of the screwdriver will push against the bottom casing of the laptop and pop it away from the rest of the frame.
There will be a loud cracking noise as the bottom of the computer detaches. You are not breaking it! Close the laptop and place it in front of you face-down with the hinge connecting the screen and keyboard away from you on the table.
Pry the rest of the bottom casing away from the computer, exposing the inside. Note that the laptop in this picture has both been placed upside down and rotated degrees from the previous picture. Locate the hard drive in the top left hand corner of the device. It is a teal blue-green color with the top right corner covered by a black piece of plastic.
Gently insert your fingernail or a spudger into the crevice on the right side of the hard drive in order to pry the hard drive from the bottom of the laptop. Note that the laptop has been rotated degrees from the first picture of this step to the second picture. The hard drive is shown in the top left corner in the first picture, but in the bottom right corner in the second.
Use your fingers to unplug the black plastic connection from the left side of the hard drive. Cancel: I did not complete this guide. So, what's the best disk clone tool for upgrading Gateway laptop hard drive? So the destination disk should be bigger than the source disk. Uninstall unnecessary programs or files that you don't want to transfer to the destination disk.
Step 5. Step 6. You will receive a boot note on how to boot from the cloned hard disk. Step 7. This process will be performed under the PreOS mode when it involves the operating system. After the clone is finished, you can take the following steps to remove the Gateway laptop hard drive, install the cloned disk and boot from it. Remove the screws securing the hard drive cover to the base.
0コメント